Uncategorised - World's #1 Metallurgy Student Community

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

Open your app

Biswajeet Tripathy

Asked: September 2, 2021In: Uncategorised

why always the reaction in a system needs to be spontaneous , what is the particular meaning of it ?

Gokul

Asked: August 3, 2021In: Uncategorised

An identical crack is present in two steel plates (of Poisson’s ratio = 0.3), one of the thickness much larger than the crack size and the other of much smaller thickness. If the fracture stress of the thinner plate is 𝞂. then the stress required for fracture in the thicker plate will be …………

Rohan Pal

Asked: August 1, 2021In: Uncategorised

What are the top choices of gate toppers???

ashokkumar

Asked: July 18, 2021In: Uncategorised

can you share your interview experience regarding the questions and topics asked?

Asked: July 6, 2021In: Uncategorised

Strain hardening coffient and exponent

Asked: July 6, 2021In: Uncategorised

how can we calculate melt loss in aluminium recycling?

Poll Results

No votes. Be the first one to vote.

Participate in Poll, Choose Your Answer.

ArunkumarIron

Asked: July 3, 2021In: Uncategorised

Any theoretical sinter making book available

[Deleted User]

Asked: June 25, 2021In: Uncategorised

Can someone provide details of Density and Specific Gravity of different grades of Carbon and Low Alloy Steel?

Social Bot

Asked: June 24, 2021In: Uncategorised

What is the different between Coking coal and non coking coal? Are Coking coal and Metallurgical coke same?

PURI0307

Asked: January 24, 2021In: Uncategorised

can I get Vizag Steel junior trainee previous papers of metallurgycal engineering?

Asked: January 3, 2021In: Uncategorised

How do you determine, having a microstructure, by what method the steel was made? For example, what are the differences between rolled steel and forging? Please describe what type of steel you see in the image.

How do you determine, having a microstructure, by what method the steel was made? For example, what are the differences between rolled steel and forging? Please describe what type of steel you see in the image.

Riya RoyIron

Asked: December 16, 2020In: Uncategorised

What is structural steel and its composition?

Inthiyaz

Asked: November 25, 2020In: Uncategorised

In a Jominy end-quench test of the eutectoid plain-carbon steel, explain the sequence of microstructures observed from the quenched end of the specimen with a schematic sketch.

In a Jominy end-quench test of the eutectoid plain-carbon steel, explain the sequence of microstructures observed from the quenched end of the specimen with a schematic sketch.

<img class='avatar avatar-42 photo' alt='vsnikhil3' title='vsnikhil3' width='42' height='42' srcset='https://secure.gravatar.com/avatar/08f0443f02ac614979db03befcc3a6ee?s=96&d=mm&r=g 1x, https://secure.gravatar.com/avatar/08f0443f02ac614979db03befcc3a6ee?s=96&d=mm&r=g 2x' src='https://secure.gravatar.com/avatar/08f0443f02ac614979db03befcc3a6ee?s=96&d=mm&r=g'>

vsnikhil3Copper

Asked: October 10, 2020In: Uncategorised

What is the relation between phase diagram and XRD plot

<img class='avatar avatar-42 photo' alt='vsnikhil3' title='vsnikhil3' width='42' height='42' srcset='https://secure.gravatar.com/avatar/08f0443f02ac614979db03befcc3a6ee?s=96&d=mm&r=g 1x, https://secure.gravatar.com/avatar/08f0443f02ac614979db03befcc3a6ee?s=96&d=mm&r=g 2x' src='https://secure.gravatar.com/avatar/08f0443f02ac614979db03befcc3a6ee?s=96&d=mm&r=g'>

vsnikhil3Copper

Asked: October 1, 2020In: Uncategorised

Creep stress exponent in coble creep is equal to

Ssk

Asked: September 22, 2020In: Uncategorised

There are two containers of water having two different nails, one is nitrogen environment and another one in oxygen environment, which will corrode first ? If we connect both the container with wire then which will corrode first ?

PandeyIron

Asked: September 22, 2020In: Uncategorised

Do anyone have hand written notes on fuel , refractory, furnaces

<img class='avatar avatar-42 photo' alt='Teja' title='Teja' width='42' height='42' srcset='https://secure.gravatar.com/avatar/370f0028f69ef497feee792b29010126?s=96&d=mm&r=g 1x, https://secure.gravatar.com/avatar/370f0028f69ef497feee792b29010126?s=96&d=mm&r=g 2x' src='https://secure.gravatar.com/avatar/370f0028f69ef497feee792b29010126?s=96&d=mm&r=g'>

TejaCopper

Asked: September 20, 2020In: Uncategorised

What is the final value for hardenbility in jominey end quench test -critical diameter ,ideal critical diameter or jominey distance like In a grossmens method we find critical diameter having 50% martensite at the centre below the critical diameter will get fully hardened and above are not .Final answer or value is critical diameter in Grossmens method. what is the final answer or value for hardenbility in Jominey end quench test? Iam more happy and clear explain me with example of 0.8 wt%C steel

<img class='avatar avatar-42 photo' alt='Teja' title='Teja' width='42' height='42' srcset='https://secure.gravatar.com/avatar/370f0028f69ef497feee792b29010126?s=96&d=mm&r=g 1x, https://secure.gravatar.com/avatar/370f0028f69ef497feee792b29010126?s=96&d=mm&r=g 2x' src='https://secure.gravatar.com/avatar/370f0028f69ef497feee792b29010126?s=96&d=mm&r=g'>

TejaCopper

Asked: September 15, 2020In: Uncategorised

I have dought If I need Austenite phase in my eutectoid steel the process is just heat the steel above A1 temparature..Or should I heat the steel upto it’s melting point and then cool to below perritectic temparature to get Austenite?WHICH PROCESS IS CORRECT ?And how the austenite stable when it’s come to equlibrium with room temparature?

<img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img class='avatar avatar-42 photo' alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg'>

Jhansi KokkiligaddaCopper

Asked: September 13, 2020In: Uncategorised

what is climb? Factors of it?

<img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img class='avatar avatar-42 photo' alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg'>

Jhansi KokkiligaddaCopper

Asked: September 13, 2020In: Uncategorised

What are excess functions/properties?

<img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img class='avatar avatar-42 photo' alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg'>

Jhansi KokkiligaddaCopper

Asked: September 13, 2020In: Uncategorised

Whether intensive or extensive properties are considered for drawing a phase diagram

<img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img class='avatar avatar-42 photo' alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg'>

Jhansi KokkiligaddaCopper

Asked: September 13, 2020In: Uncategorised

Can I draw P vs Molar volume diagram?

<img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img class='avatar avatar-42 photo' alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg'>

Jhansi KokkiligaddaCopper

Asked: September 13, 2020In: Uncategorised

When is entropy maximum in an alloy?

<img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' data-srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' data-src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg' class='avatar avatar-42 photo lazyload' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw=='><noscript><img class='avatar avatar-42 photo' alt='Jhansi Kokkiligadda' title='Jhansi Kokkiligadda' width='42' height='42' srcset='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg 1x, https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-84x84.jpg 2x' src='https://askmemetallurgy.com/wp-content/uploads/2020/06/IMG_20200627_083943-42x42.jpg'>

Jhansi KokkiligaddaCopper

Asked: September 13, 2020In: Uncategorised

What are the polynomials you saw in Metallurgical field?