A plate of thickness h = 120 mm is cold rolled in a mill with a roll diameter of 200 mm. If the coefficient of friction µ is 0.1, the maximum possible reduction Δh in a single pass is____________. (in mm to one decimal place)
Share
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
A plate of thickness h = 120 mm is cold rolled in a mill with a roll diameter of 200 mm. If the coefficient of friction µ is 0.1, the maximum possible reduction Δh in a single pass is____________. (in mm to one decimal place)
Get every updates in your mailbox!
Delta Hmax = μ2R = 0.12 × 100 = 1mm
Delta Hmax = μ2R = 0.12 × 100 = 1mm
See less
See lessCorrect answer is 1mm. @Digbijaya igit described it best. Thank you.
Correct answer is 1mm. digbijaya igit igit described it best. Thank you.
See lessΔhmax = μ2R = 1mm
Δhmax = μ2R
= 1mm
See less